Skip to content
SIGNAVERO
Materials / 3M® Commercial Graphics

3M® films we specify.

Hero SKUs IJ180Cv3, IJ39, IJ680CR, and DI-NOC, each paired with the right overlaminate. The 3M® Commercial Graphics product family is the most-installed film in the Signavero network.

Signavero LLC is an independent signage installation network. 3M and the listed product names are trademarks of 3M Company. We specify, source, and install 3M materials; we are not an authorized 3M reseller.

CAST · CONFORMSCALENDERED · BRIDGES → LIFTSSUBSTRATERIVET
Overview

The film family Signavero specifies more than any other.

3M®'s Commercial Graphics line is what most of our installs run on. Here are the hero SKUs we spec week in and week out, each paired with the overlaminate that keeps the manufacturer warranty enforceable.

Hero SKUs

3M® films we specify weekly.

  • SKU
    IJ180Cv3
    Type
    Cast
    Mil
    2 mil
    Warranty
    Up to 10 yr (MCS)
    Best use
    Vehicle wraps, smooth-wall murals, long-life window graphics
    Recommended laminate
    8518 / 8519 / 8520
  • SKU
    IJ39
    Type
    Calendered
    Mil
    3.5 mil
    Warranty
    3-5 yr
    Best use
    Flat fleet, simple-curve box trucks, signage faces, short-term promotional
    Recommended laminate
    8518
  • SKU
    IJ680CR
    Type
    Reflective (engineer-grade, removable)
    Mil
    7 mil
    Warranty
    Up to 9 yr
    Best use
    Safety, regulatory, emergency-vehicle, fleet exterior reflective
    Recommended laminate
    Matched reflective overlaminate
  • SKU
    DI-NOC
    Type
    Architectural finish
    Mil
    Varies (8-16 mil)
    Warranty
    5-12 yr indoor
    Best use
    Elevator interiors, door faces, retail fixtures, columns, millwork
    Recommended laminate
    Self-laminated; clearcoat in high-wear zones

Datasheets and warranty terms vary by region and substrate. Full manufacturer documentation is linked below.

When to spec what

Cast for shape, calendered for flat.

  • IJ180Cv3 is our default for wraps that cross rivets, recesses, and compound curves. The 130% stretch and Comply v3 air-egress adhesive bury bubbles and forgive small alignment shifts while the crew works.
  • IJ39 goes on when the substrate is flat. Speccing IJ180Cv3 on a flat box-truck panel is over-engineering, and you pay for it. IJ39 reads the same from the street at a fraction of the cost, and its warranty matches what a flat panel actually needs.
  • IJ680CR covers any regulatory or safety scope where the graphic has to read at night under headlights. Think police, fire, ambulance, school transport, and construction signage.
  • DI-NOCis for the brand that wants the look of stone, wood, or brushed metal without rebuilding the wall to get it. It's an architectural finish film, applied right over a substrate the brand already owns.
Specification notes

The laminate is not optional.

The most common mistake on a 3M install is dropping the matched overlaminate to shave 15-25% off the film cost. Skip it and the manufacturer warranty no longer applies. The print also ages 50-70% faster under UV, and any chemical contact (cleaning agents, fuel splash on fleet, graffiti remover) leaves a permanent mark. That's why the laminate is its own line item on every Signavero quote, and we don't cut it.

For full manufacturer documentation, see 3M® Commercial Graphics.

Brand names and trademarks referenced are property of their respective owners. Signavero LLC is an independent signage installation network and not an authorized reseller of third-party brands unless explicitly stated. Service area descriptions reflect coordination capability through our installer network; Signavero LLC is a California limited liability company based in Ventura, California. ®, ™, and brand names appearing on the site are trademarks of their respective owners; references herein are nominative fair use for the purpose of identifying compatible products and services.

Materials & capabilities used

Related across the network.

Back to Materials
FAQ

Frequently asked.

[04.A.99]Next step

Specify 3M® films with Signavero.

One spec, every market. Itemized estimate back inside 48 hours.

Get a Quote within 48 HoursDownload the materials spec matrix (PDF)

We require 3M Certified, OSHA-trained, insured crews on every install, with photo QA at closeout.