Window graphics: full-coverage, perf, frosted, and cut vinyl.
Perforated window film (one-way vision), frosted and etched vinyl for privacy, full-coverage prints, cut-vinyl lettering, and anti-graffiti overlaminates. All applied bubble-free by crews who install storefront windows every week.

Storefront graphics that survive a sunny afternoon.
Window graphics see the most foot traffic and forgive the least. We handle perforated window film (one-way vision), frosted privacy vinyl, full-coverage prints, cut-vinyl lettering, and anti-graffiti overlaminates. Every panel goes up bubble-free, applied by installers chosen for storefront glass. A clean install refreshes a campaign overnight; a sloppy one tells every passerby the brand cut corners.
Retail storefronts, privacy installs, brand campaigns.
- Storefront window campaigns. Seasonal brand messaging on retail glass. Perforated film when you want full coverage, cut vinyl when a headline does the job.
- Privacy films. Frosted and etched-glass-finish vinyl for conference rooms, hospitality lobbies, healthcare exam-room glass, and office partitions. Same film, very different reasons.
- Brand identification at entry. Cut-vinyl logo and tagline at eye-height on the door or transom glass; ADA-compliant where required.
- Seasonal POP refreshes. Quarterly window resets. One campaign comes off clean and the next goes up the same visit. Cast films are built for that cycle.
Cast vinyl for longevity, perf for coverage, frost for privacy.
3M IJ180Cv3 or Avery MPI 1105 for long-life storefront and architectural prints.
50/50, 60/40, or 30/70 print-to-view ratio. The split depends on whether the inside view or the outside print wins.
3M Fasara or Oracal 8810, anywhere from light haze to full etched-glass privacy.
Oracal 651 and 951 cast vinyl in solid colors for logos, headlines, and code text.
Standard on public-facing exterior installs. It pays back the first time someone wipes it down.
Color, perf ratio, and the second-pass print.
A window print gets judged in direct sunlight more than any other job we run, and daylight is where color either holds or falls apart. So we spec to a daylight Pantone match, not a press-room match. On perforated film, the perf ratio is the real design call. 50/50 reads balanced from both sides. 60/40 pushes the brand harder to the street, which retail usually wants. 30/70 protects the inside view, which suits hospitality and office. On any storefront over 60 square feet we run a second color-match pass once the first panel is up. A pre-flight adjustment costs far less than tearing down and starting over.
Temperature, edge seal, and seasonal pull-down.
- Glass temperature. Cast film lays down clean between 60-90°F. Hot summer glass means shade or an after-hours slot. Cold winter glass means heating the surface before we apply.
- Edge seal. Multi-panel storefronts get registered to within 1/16-inch. Wherever exterior weather can reach a panel edge, we seal it.
- Removability spec. Promotional and seasonal installs go on with a removable adhesive system. Permanent installs use the longer-life chemistry. Mix the two up and the program ages badly, then the next refresh costs more than it should.
- Wash protocol. Window cleaners can wreck graphics without knowing it. Every closeout packet spells out the squeegee-only, no-ammonia approach so the crew on site gets it right.
Window graphics in context.
Window graphics usually ship alongside wall graphics when a brand wants the whole interior to read as one environment. Pair them with channel letters and the exterior reads as one too. We pull film from 3M Commercial Graphics and Avery Dennison. For the lifestyle retail story, see apparel & outdoor.
Related across the network.
- [03.C] / Section 03
Wall Graphics
Printed wall murals, dimensional logo walls, and brand installs on drywall, brick, concrete, and panels. Surf…
- [04.A] / Section 04
3M® films
3M® films we specify: IJ180Cv3, IJ39, IJ680CR, DI-NOC. Best uses, durability, and recommended overlaminates,…
- [04.B] / Section 04
Avery Dennison® films
Avery Dennison® films we specify: MPI 1105 SuperCast and MPI 1405. Premium wraps, fleet rollouts, POP, and ar…
- [06.A] / Section 06
Apparel & Outdoor
Signage and fixtures for apparel and outdoor brands: window programs, dimensional logos, and store fixtures a…
- [ Start ]
Get a Quote
One brief, one PM, an itemized estimate back fast.
Frequently asked.
What is perforated window film (one-way vision)?
Perforated window film, also called one-way vision film, is a printed film with micro-perforations that lets people inside see out clearly while the print reads as full-coverage from outside. Standard 50/50 perforation balances the inside view against print sharpness. A 60/40 split (more print, less view) reads stronger outside on retail storefronts, and 30/70 prioritizes the inside view for hospitality and offices.
Frosted vs etched: which should we spec for privacy?
Frosted is a print-and-overlaminate or solid-color cast vinyl that gives a uniform translucent look. It's fast to install and easy to swap. Etched glass-finish vinyl mimics the sandblasted-glass look and is the premium read for hospitality lobbies and conference rooms. Both block sightlines. Etched costs more but ages better visually.
How long does a window install take per storefront?
A standard two-person crew installs 80-120 square feet of clean, single-panel window graphics per hour after surface prep. A full storefront, say 4 panels at 6 feet tall with seasonal POP graphics, is generally a 3-4 hour job. Multi-pane perforated installs with seam alignment run longer, and the survey sets the labor estimate up front.
Why do your window graphics go on bubble-free?
Air-release (air-egress) adhesive. The cast films we spec, like 3M IJ180Cv3 with Comply v3 and Avery MPI 1105 with Easy Apply RS, have micro-channels in the adhesive that let trapped air escape as the crew squeegees, so a clean install doesn't tunnel or blister. The air-release behavior is the same on interior glass and exterior storefronts. Exposure changes the film and overlaminate we pick, not the adhesive technology.
Specify window graphics with Signavero.
One spec. Fabricated and installed in every U.S. market.
We require 3M Certified, OSHA-trained, insured crews on every install, with photo QA at closeout.